How to Reset Viper Remote Start? (A Quick and Easy Guide)

If your Viper remote start stops working when you least expected, it is normal to worry because you are uncertain why it doesn’t work. If your vehicle is not receiving signals through the Viper remote start, many reasons can cause the defect. But resetting the Viper remote start is the easiest option available for a quick fix. But, the method to reset the Viper remote start is not familiar to most. Thus, in this article, we will discuss how to reset Viper remote start and the topics related to the answers. Ensure to stick to the article and read till the end to find out about the Viper remote start, the reasons to reset and other options available to fix your remote start.

What is Viper Remote Start?

The Viper remote start is the device that connects to the car ignition system through signals, allowing it to start the vehicle, turn it off, controlling the heating or cooling system along with other options.

The Viper remote start is also a great way to secure your car from thieves and vandals, including options like a stinger, double guard shock sensor, Failsafe starter killer and a 6-tone siren.

Viper remote car can send signals at a 600 meters range and starts your engine with one button push. The key design of the Viper remote is slim and designed to the modern style.

Why Might you Need to Reset your Viper Remote Start?

You will need to reset your Viper remote start for various reasons. Hence, you cannot limit the answer to a single line because the reasons might differ for each individual and the issues they face in their Viper remote. But most of the time, resetting the Viper remote start is essential if your car ignition system is facing issues receiving signals from the Viper remote start. Hence, below are some reasons you are inclined to reset the Viper remote start.

1. If you are using the Viper remote to start, pressing the buttons too many times can disrupt the program. As a result, resetting the Viper remote start can help the situation.
2. Pressing the wrong button to start the engine can put the Viper remote start to valet mode.
3. Physical damages in the Viper key remote start.
4. If the battery dies in the Viper remote start, it may lose the programming because key starters have non-volatile memory.

How Do you Reset your Viper Remote Start System?

Once you have figured out the situation, incline your to reset the remote start system so you can start the project. Thus, a step-by-step guide is given below to rest the Viper remote start system and ensure you read the instructions correctly before resetting your Viper remote start system.

1. Take hold of the Viper remote system manual.
2. Gather all the necessary things need for the process according to the manual.
3. Get in the driving seat of the car you are using. The Viper remote start and close the door.
4. Insert the key on the ignition system, turn to or push the button to start, but do not press the brake pedal during this process.
5. Now press the Lock button in the Viper remote, start to turn on, and press the button again after a few seconds to turn off.
6. Repeat the turn-on and off process a few more times; approximately 3 to 4 turns.
7. You will hear dinging, pinging, or buzzing noises the 3^rd or fourth time you repeat the on-and-off process. Once you hear the ringing noise, it is to confirm you are in the programming step of your Viper remote start.
8. Again, long press the lock button in the Viper remote start interface for a few minutes.
9. Wait for 10 seconds, and turn off your car. Turn the key or push the button.
10. Now you can get out of the car and go further to test if the reset is successful. But not too far; maintain a considerable range till you confirm the Viper remote start is working just fine as usual.

What Should you Do If Resetting your Viper Remote Start does Not Work?

If resetting your Viper remote start has not fixed the issues, then you can consider the other possible reasons why your Viper remote start is not working. Below are other reasons you should consider fixing the faulty remote start.

• Dead Batteries

If the batteries are dead in your Viper remote start, replacing new ones can fix it.

•  The Car is Not in Park

If your car is not turned off or is not in Park, your Viper remote start will not work.

• The Viper Remote Start is not ON

Your Viper remote start will not work on your car unless you have activated it; hence before you press any button in the interface, ensure to turn on the remote starter.

• High Coolant Temperature and Low Oil Pressure

Your car will not be able to receive signals from your Viper remote start if the coolant temperature is high and the oil pressure is low in the vehicle. Hence, you must wait for the car to cool down and ensure the oil levels are correct. Once your car’s temperature and oil pressure are stable, the Viper remote start will work.

• Key in the Car

Another instance the Viper remote start will not work is if the regular key is in the car; hence next time, remove the key before you use the Viper remote start.

FAQ

Can you Reset your Viper Remote Start System, or Should you Seek Professional Help?

Resetting the Viper remote start system is quite simple, and you can do it yourself without seeking professional help. But, if you think the defect cannot be fixed by resetting, seeking professional help is better than making the case worse.

Why is My Viper Remote Start Beeping?

If your Viper remote starts beeping out of nowhere, it is to notify you that the battery is low.

Watch this one,

Video Credits – Auto Resource

You May Also Like

• How to Open a Hyundai Key Fob? Tips From the Pros!
• How to Bypass Power Window Switch? – Comprehensive Guide